BATHROOM LAYOUTS · LA-29

Make a 10x12 Bathroom Work for You: Four Layout Options

A long tub, individual vanities or laundry can each be a sensible use of 120 square feet. These four measured plans show what you gain and where to look more closely.

THE ANSWER

A 10x12 bathroom layout gives you a 120 × 144 in rectangle, or 120 sq ft, when those are the finished inside dimensions. That can support several fixture combinations, but the useful question is which one deserves the space. The four examples below prioritize a long tub, separate vanities, a freestanding bath or laundry. Their measured footprints are starting points for checking real products and everyday movement.

Inside room120 × 144 in
Compare4 layouts
Check nextActual products
Floor area120 sq ftFinished inside room
Illustrative plans, not construction approvalLA-29

Give the extra floor space a job

Start with the feature you would miss most. A bath you use every evening may justify a larger tub; two people getting ready together may value their own counters. Laundry saves trips through the house but adds equipment, noise and servicing needs.

PlanMain benefitDecision to resolve
A: long tub and showerA 72 in bathing footprint plus a separate showerTub enclosure and shower assembly at the far wall
B: separate vanitiesTwo individual 48 in countersServices and storage on opposite walls
C: freestanding bathA tub centered in the view from the doorwayCleaning, filler position and floor support
D: laundryA side-by-side laundry zone without a tubInstalled appliance dimensions and open doors

Look through the doorway before fixing the plan

Watch Fifi McGee’s discussion of doorway sightlines at 0:44 and sink landing space at 2:37. Then stand at your own doorway and decide what you want to see first. These are design observations; the video’s rooms and UK advice do not establish dimensions or US requirements for a 10x12 bathroom.

Fifi McGee: Bathroom Layout Mistakes You’ll Regret Every Day. BathDraft’s plans are independent studies.

Four 10x12 bathroom layouts to compare

These drawings use generic fixtures inside the finished room. Dashed rectangles mark selected screening spaces, not every required clearance. They omit wall assemblies, shower-door movement, cabinet pulls and some service allowances. Open a plan in the bathroom layout planner, then enter your actual measurements and entrance position.

A 10 by 12 foot bathroom with a 72 by 36 inch soaking tub across the far end, a 60 by 36 inch shower in the corner beside it, a 72 inch double vanity, the toilet and a linen cabinet10 ft · 120 in12 ft · 144 in24 in21 in21 inTUB 72×36SHOWER 36×6072″ VANITYLINEN42 in21 in
A 305 by 366 centimeter bathroom footprint study with a 183 by 91 centimeter tub, a 91 by 152 centimeter shower, a 183 centimeter vanity, toilet and linen cabinet. Construction assemblies and operable doors are not fully modeled.3.05 m3.66 m61 cm53 cm53 cmTUB 183×91 cmSHOWER 91×152 cm183 cm VANITYLINEN107 cm53 cm
Layout A: a 72 × 36 in tub, a shower footprint rotated to occupy 36 in of the far wall, and a 72 in double vanity.
Open this plan in the planner

A. Keep a long tub and a separate shower

The tub occupies the far-left corner; the 60 × 36 in shower runs down the right wall. A double vanity sits on the left, with the toilet and linen cabinet opposite. The model leaves 63 in between the vanity face and shower footprint where they oppose one another.

Choose this arrangement if bathing and showering both matter. The long tub is the defining choice: Kohler’s K-1159-R is one example of a nominal 72 × 36 in alcove bath, but its installation needs more detail than a rectangle.

Resolve the tub’s end enclosure, its junction with the vanity and the shower entrance before ordering. The room has no enclosed toilet area. A generous center does not provide privacy when two people use the bathroom together.

A 10 by 12 foot bathroom with a 66 inch tub across the far end, a 60 by 36 inch shower in the corner beside it, two 48 inch vanities on opposite walls and the toilet by the door10 ft · 120 in12 ft · 144 in24 in21 in21 in21 inTUB 66×32SHOWER 36×6048″ VANITY48″ VANITY21 in42 in
A 305 by 366 centimeter bathroom footprint study with a 168 by 81 centimeter tub, a 91 by 152 centimeter shower, two separate 122 centimeter vanities and toilet. Construction assemblies and operable doors are not fully modeled.3.05 m3.66 m61 cm53 cm53 cm53 cmTUB 168×81 cmSHOWER 91×152 cm122 cm VANITY122 cm VANITY53 cm107 cm
Layout B: two 48 in vanities are staggered on opposite walls rather than directly facing each other.
Open this plan in the planner

B. Give each person a separate counter

A 66 × 32 in tub and the rotated shower occupy the far end. One vanity sits below the tub; the other is near the entrance on the opposite wall. Their modeled front spaces are 63 in and 69 in, measured to the nearest opposing fixture.

The staggered arrangement separates getting-ready stations, but each vanity needs a useful mirror, light and storage. Mark which drawers open while someone passes, and keep a landing surface beside each basin rather than filling the counter with accessories.

There is only a 1 in modeled gap between the tub footprint and the left vanity along that wall. Counter overhangs and enclosure details may require repositioning. Have the plumbing routes checked before assuming two counters will be as straightforward to install as one shared cabinet.

A 10 by 12 foot bathroom with a 66 inch freestanding tub centered on the far wall, a 60 by 36 inch shower and the toilet on one side wall and a 72 inch double vanity on the other10 ft · 120 in12 ft · 144 in24 in21 in21 inTUB 66×31.5SHOWER 60×3672″ VANITY18 in18 in
A 305 by 366 centimeter bathroom footprint study with a 168 by 80 centimeter freestanding tub, a 152 by 91 centimeter shower, a 183 centimeter vanity and toilet. The modeled tub setback is 20 centimeters, not a universal installation requirement.3.05 m3.66 m61 cm53 cm53 cmTUB 168×80 cmSHOWER 152×91 cm183 cm VANITY46 cm46 cm
Layout C: the 66 × 31½ in tub is centered with 27 in to either side wall and an illustrative 8 in rear gap.
Open this plan in the planner

C. Make the freestanding tub the focal point

The centered entrance looks toward the bath. A 60 × 36 in shower occupies the right wall, with the toilet below it; a 72 in vanity sits opposite. The central distance between the vanity and shower footprints is 63 in.

The 8 in rear gap is a drawing choice, not a universal installation clearance. Try reaching the floor behind the proposed bath and decide where its filler, towel and everyday bathing supplies will go. Do not assume a window, drain or usable service access exists just because the drawing leaves space.

The Kohler Abrazo specification supports the example’s nominal 66 × 31½ in footprint. It also illustrates why the selected tub’s weight, support and rough-in instructions need separate checks.

A 10 by 12 foot bathroom with a 60 by 36 inch shower, the toilet, a washer and dryer side by side, a linen cabinet and a 72 inch double vanity10 ft · 120 in12 ft · 144 in24 in21 in21 in25 inSHOWER 60×3672″ VANITYWASHER · DRYERLINEN18 in18 in
A 305 by 366 centimeter bathroom footprint study with a 152 by 91 centimeter shower, a 183 centimeter vanity, toilet, linen cabinet and a generic 145 by 94 centimeter laundry envelope. Selected appliance installation dimensions must be verified.3.05 m3.66 m61 cm53 cm53 cm64 cmSHOWER 152×91 cm183 cm VANITYWASHER · DRYERLINEN46 cm46 cm
Layout D: a generic 57 × 37 in laundry envelope replaces the tub. The 62 in laundry aisle does not describe every clearance in the room.
Open this plan in the planner

D. Put laundry close to the bedroom

The shower and toilet share the far end. Laundry equipment occupies the right wall below the toilet, followed by a linen cabinet; the double vanity is opposite. The modeled aisle is 120 − 37 − 21 = 62 in. Ahead of the toilet, however, the opposing shower leaves only 30 in.

The laundry rectangle is a planning allowance, not a verified installation for every pair. For example, Samsung describes its WF45B6300 washer as designed for a 39 in installation depth, despite a shallower machine body. Enter the selected pair’s installed depth, connections and door movement before relying on the aisle.

Leave somewhere to set a basket without obstructing the toilet or shower. Use the bathroom laundry combo guide for appliance arrangements and service planning; this option gives up the bathtub entirely.

Check what remains on the 10-foot wall

In Layout A, the tub uses 72 in and the rotated shower uses 36 in of the 120 in far wall, leaving 12 in. Layout B’s 66 in tub leaves 18 in. These remaining strips are not walkways or guaranteed spare storage.

Two ways to divide the same 10 foot bathroom wall: layout A reserves 72 inches for a tub and 36 inches for a shower, leaving 12 inches; layout B reserves 66 and 36, leaving 18. Remaining width must accommodate the installation details.Budget the far wall before choosing fixtures120 in finished inside widthLayout A72 inTub12 in36 inShower widthLayout B66 inTub18 in36 inShower widthGold = remaining width, not a finished opening or a walkway.Check end walls, finishes and the selected shower assembly.
Two ways to divide a 305 centimeter bathroom wall: layout A has a 183 centimeter tub and 91 centimeter shower width, leaving about 30 centimeters; layout B has a 168 centimeter tub and 91 centimeter shower, leaving about 46 centimeters. Dimensions are rounded.Budget the far wall before choosing fixtures305 cm (rounded)Layout A183 cmTub30 cm91 cmShower widthLayout B168 cmTub46 cm91 cmShower widthGold = remaining width, not a finished opening or a walkway.Check end walls, finishes and the selected shower assembly.
Original BathDraft width study. Gold marks the remainder after the nominal fixture widths; metric labels are rounded.

A finished enclosure needs its own assembly, waterproofing and product-specific opening. Check those details together rather than subtracting nominal sizes and declaring the installation complete. Our tub and separate shower layouts compare other arrangements when this wall cannot accommodate the chosen products.

Test the room with everything open

Mark the fixtures on the floor, then add open drawers, the shower entry and laundry doors. Walk from the entrance to each fixture while another person stands at the vanity. Decide where towels and a hamper belong during that routine.

Each saved plan shows a 32 in door. That is not a verified 32 in clear opening through the installed frame. The NKBA planning guide distinguishes clear opening from door size and recommends 30 in in front of fixtures. Its included code references use the 2015 IRC/IPC; current local requirements and accessibility needs require project-specific review.

What changes in a 12x10 or 10x10 bathroom?

A 12x10 room has the same area as a 10x12, but the entrance, windows and plumbing may sit on different walls. Rotate the entire drawing only if those fixed features also make sense in the new positions.

A 10x10 room loses 20 sq ft. It needs a fresh layout check; shortening these plans does not preserve every operating space. Compare the 10x10 bathroom layouts for square-room options, or the master bathroom guide if your room size is still flexible.

Final Takeaway

Choose the 10x12 plan around the feature you will use, then check its tightest spot. The long tub, separate counters, freestanding bath and laundry each spend the space differently. Verify actual fixtures, installation details and open-door routes before turning the preferred drawing into an order.

Main Sources

Plans use illustrative finished inside dimensions. Manufacturer instructions and local requirements govern the actual project.