An 8x12 bathroom has 96 sq ft of floor area. Our first arrangement fits a tub, separate shower, double vanity and toilet. The other plans make different trades: a smaller shower for a toilet partition, an exposed tub with cleaning space, or laundry instead of a separate shower. These are alternatives, not features to add together.
Start with the finished room and the doors
These drawings assume 96 × 144 in between finished wall faces. If your measurement is stud to stud, deduct the actual wall build-up before copying a plan. Mark windows, soil-pipe positions and any sloping ceiling, too.
The modeled vanities project 21 in; the elongated toilets project 30 in. Product dimensions differ. Dashed fixture zones are reference overlays, not a complete approval check. The entrance arcs represent 30 in door leaves, not verified clear openings. Shower-door movement, drawers, handles and appliance doors need their own space. Open a saved arrangement in the bathroom layout planner and replace the placeholders with your actual sizes.
Choose the arrangement around your daily routine
Layout A: give the separate shower priority
A 60 × 30 in tub occupies the far wall; a 60 × 36 in shower runs along the opposite end of the right wall. The 72 in vanity faces that side of the room.
Where vanity and shower overlap, their fronts leave 39 in: 96 − 21 − 36. The modeled toilet has 45 in ahead to the vanity: 96 − 30 − 21. These gaps describe empty floor; they do not prove two people can pass while a drawer or shower door is open.
Choose this for: a household that uses both a bath and a separate shower. Keep towels reachable from the shower without crossing an opening door. If bathing arrangements matter more than room size, compare our tub-and-shower layouts.
Layout B: screen the toilet, then resolve the entrance
This arrangement swaps the larger shower for a 48 × 36 in footprint and uses a 60 in vanity. The tub moves to the entrance wall. A 4½ in partition creates a toilet zone 36 in wide inside, with the toilet centerline 18 in from each side.
The partition extends 66 in, but its front is open. The saved plan's long toilet-front measurement continues through that opening toward the tub. It cannot describe clearance inside a closed compartment.
If a closure's inside face sat at the partition end, the modeled toilet would leave 36 in ahead: 66 − 30. Its wall thickness and door operation still require design. NKBA recommends a 36 × 66 in separate compartment with an outward-swinging or pocket door; that recommendation is not a completed doorway detail.
A pocket door also needs wall beside its opening. For example, Johnson's 1500 Series specifies a 61 in rough opening for a 30 in leaf. Confirm the frame, cavity, pipes and structure rather than assuming it fits across this narrow front.
Check what the doorway reveals
In this Fifi McGee video, the passage around 0:44–1:17 considers a toilet visible from a landing or bedroom and suggests screening its sightline. Apply that observation to Layout B: a partition may improve the view, while enclosed privacy still needs a workable door.
Layout C: leave room to use and clean around the tub
The tub measures 66 × 31½ in and stands 6 in from the right wall. Opposite the vanity, that leaves 37½ in: 96 − 21 − 6 − 31½. Its entrance-side end is 18 in from the wall.
The wall gap is an assumption, not a universal cleaning or installation allowance. Reserve space for the chosen filler, its controls and maintenance access. Test whether you can actually reach the floor behind the bath.
Kohler's Abrazo K-1800 has the same nominal external size as this placeholder, but its specification calls for checking the actual product before rough-in. Match the drain to the selected bath and existing plumbing; do not assume every freestanding replacement requires the same drain move.
Layout D: measure laundry with the doors open
The 57 × 37 in laundry placeholder faces a 60 in vanity. Its closed-front gap is 38 in: 96 − 37 − 21. That is not a loading-space measurement.
For a real example, LG lists its WM4000H washer at 30¼ in deep, with 55 in depth when its door is open and 4 in minimum rear clearance. With that rear space, its open door would project 59 in from the wall, leaving only 16 in to this vanity: 96 − 59 − 21.
That model-specific example shows why a closed appliance fitting the drawing does not establish loading or passing space. Check both machines, laundry baskets and the removal route. A smaller pair or stacked arrangement may suit better; our bathroom laundry guide compares those options and service considerations.
A nearby room size changes more than the area
Do not copy these plans into a smaller rectangle unchanged. Using Layout C's same vanity depth, tub width and wall gap, the width arithmetic changes as follows:
| Room | What changes in this comparison |
|---|---|
| 7 × 12 ft | The vanity-to-tub gap falls to 25½ in. |
| 8 × 11 ft | The width gap stays 37½ in, but the room loses 12 in of length. |
| 8 × 12 ft | Layout C has the illustrated 37½ in width gap. |
| 9 × 12 ft | The same cross-section leaves 49½ in. |
These are cross-section calculations, not full-room fit approvals. Door position, fixture access and the remaining length still need testing. A 12x8 label describes the same rectangle only if you rotate its doors and fixtures with it.
Final Takeaway
Choose your priority before enlarging every fixture. Layout A favors separate bathing; B explores toilet screening; C makes the tub prominent; D brings laundry into the room. Then test the chosen plan with doors, drawers and people in their operating positions. Those checks decide whether the extra floor space is useful.
Main Sources
- NKBA Bathroom Planning Guidelines — separate-compartment recommendation.
- Johnson Hardware 1500 Series instructions — pocket-door rough-opening example.
- Kohler Abrazo K-1800 specification — nominal bath dimensions and rough-in verification.
- LG WM4000H specification — appliance depth, open-door depth and rear space.
Plans and arithmetic are original BathDraft examples. Product instructions and locally adopted requirements govern the final design; these drawings are not construction or accessibility approvals.