A 5x5 bathroom is 60 × 60 in, or about 1.52 × 1.52 m. A toilet and basin are the clearest starting point. A tub, toilet and basin require much closer scrutiny: the compact tub concept below has a sink-spacing concern and a door-swing conflict. The shower concept omits a basin. Treat these as different proposals to evaluate, not three equally complete, approved bathrooms.
Measure the finished space first
Confirm that “5x5” describes the space between finished walls, not the framing before tile, wallboard or a concealed toilet carrier is added. Mark the actual door, window, drain and any pipe enclosure. A few inches lost to a new wall can change which fixture combination is worth considering.
The drawings use nominal fixture blocks and include editable plans. Dashed areas show selected planning checks; they do not certify local compliance or accessibility. Use the bathroom layout planner to test your measured room, then compare actual product drawings. On a narrow screen, each diagram scrolls sideways; keyboard users can focus it and use the arrow keys.
Three concepts for different needs
A. Keep the room as a half bath
The illustrated vanity is 30 in wide and 21 in deep; the toilet projects 30 in. That leaves 39 in in front of the vanity and 30 in in front of the toilet. Their centers are 30 in apart. Each center is 15 in from its nearest side wall, and the toilet center is also 15 in from the cabinet edge.
A 30 in vanity is the choice drawn here, not a proven maximum for every 5x5 room. A narrower cabinet can create a different balance of storage and side room. Check drawer travel, the toilet-paper holder and where someone stands while opening the entrance. For broader half-bath planning, use the half-bath dimensions guide.
B. Study the tub option, but fix the conflicts first
A nominal 60 × 30 in tub occupies the far end. Opposite each other, a toilet projecting 21 in and a sink projecting 12 in leave 60 − 21 − 12 = 27 in between their fronts. The sink is 18 in wide. Its center is only 9 in from the tub edge; that side position needs a separate check from the open floor in front.
The entrance is also unresolved. Its 30 in door arc clips the sink block’s nearest corner by about 0.45 in. A rounded basin might differ from this rectangle, but a close drawing is not operating clearance. Do not copy Layout B unchanged: choose the actual basin and resolve the door and side-space issues before relying on it as a full bathroom.
A tub’s nominal length is not its installation opening. For example, Kohler’s Villager sheet lists a 60 × 30¼ in bath and says to measure the actual product for rough-in. Its width already differs from this 30 in block. The bathtub measuring guide explains which dimensions to collect.
C. Recognize what the shower concept leaves out
This arrangement has no handwashing basin. It therefore does not answer a request for a self-contained shower bathroom. Decide how handwashing would work and have the intended room use checked locally; a nearby basin is not something to assume will be acceptable.
The shower-front measurement also needs context. The drawing has a 24 in-wide planning band on the left with 30 in of floor ahead. Beside the toilet on the right, the gap to the shower front is only 6 in. The enclosure needs an entrance in a usable position. Its outside footprint does not establish the interior floor size, threshold or finished opening.
Why a front gap does not settle the whole fit
NKBA recommends 30 in in front of fixtures and avoiding door interference. These planning recommendations are separate from local requirements. Layout B leaves 27 in between the toilet and sink.
Here, the basin center is 39 in along the side wall and the tub ends at 30 in: the difference is 9 in. The door’s hinge-to-corner distance is about 29.55 in, shorter than its 30 in leaf. Those are geometry checks, not a finding that every possible 5x5 tub arrangement fails. Different products, an altered entrance or more room may change the result.
A shorter bowl still needs space behind the wall
The 21 in toilet projection in Layout B represents a compact bowl, not the whole installation. Kohler’s K-6303 specification, for example, shows that projection together with a carrier requiring 2×6 framing. It is a dimensional example; check current specifications for the system you select.
Geberit North America’s installation demonstration makes the hidden work visible. From about 0:40, it shows the carrier and tank supported within a framed wall, with the drain arranged inside. Use it to understand why a compact bowl does not measure the wall assembly. Recheck the finished room after any wall build-out; this system-specific demonstration does not validate Layout B.
Geberit North America, Installation How-To: Installing a Geberit system in a 2x6 wall. Watch the original on YouTube.
Test a routine before ordering
Mark the actual fixture footprints on the floor, including projections and door arcs. Walk in, close the door, sit at the toilet, reach the paper holder and stand at the basin. Open storage while someone occupies the room. Use a cardboard outline for a shallow basin: its width alone says little about how easily you can wash without splashing.
If a shower, toilet and basin are essential, start with those three requirements and test different products rather than accepting this page’s two-fixture shower concept. Our examples do not prove such a combination impossible in every 5x5 room. Where space can expand, compare the 6x6 bathroom layouts; keep your actual entrance and plumbing positions when judging the extra space.
Final Takeaway
A half bath is the most straightforward use shown here. The tub concept needs its door and sink conflicts resolved, and the shower concept lacks a basin. Choose the room’s essential functions first, then verify the finished dimensions, actual fixtures and their operation together.
Main Sources
- NKBA Bathroom Planning Guidelines — planning recommendations; this edition references the 2015 IRC and IPC.
- Geberit’s wall-hung installation planning overview — carrier, framing and finished-wall coordination.
- Kohler Rely K-8643 shower-base specifications — nominal size, rough-in and threshold details.
BathDraft’s plans, gap calculations and constraint diagram are original illustrative work. Product-specific references appear beside the relevant examples.