A 6x6 bathroom is a 72 × 72 in room. The examples below pair a 36 in shower with a 24 in vanity, a 32 in shower with a 36 in vanity, or an angled corner shower with a side-wall vanity. A tub option uses an 18 in deep vanity. None is a universal fit: shower interiors, opening doors and actual fixture projections still need checking.
Choose the bathing space before the vanity
Start with the daily job: showering, bathing or both. A compact room does not have to be a three-quarter bath; its fixtures determine the bathroom type. If a tub is essential, begin with Layout D rather than trying to add one after choosing a large counter.
For a shower-only bathroom, compare A and B first. They keep the toilet and entrance in the same places, making the trade-off easy to see. C changes the shower shape and moves the vanity to another wall.
Measure between the proposed finished walls, then mark the door, window, drain and supply positions. New lining can reduce the usable rectangle. A 30 in toilet projection and a 21 in vanity depth leave 72 − 30 − 21 = 21 in between their fronts. An uncounted overhang or longer toilet reduces that space immediately.
NKBA’s published guidance recommends 30 in in front of fixtures, while summarizing a 21 in model-code minimum at toilets and lavatories. It references the 2015 IRC/IPC; check the rules adopted locally.
Four 6x6 plans to test
Open a drawing in the bathroom layout planner and replace the example dimensions with your own. The dashed areas show selected checks. The room doors are modeled, but shower-door swings, handles and people are not. On mobile, swipe a diagram sideways; keyboard users can focus it and use the arrow keys.
- Toilet-to-vanity gap: 21 in
- Toilet centerline to shower edge and right wall: 18 in each
A: give more of the corner to showering
The shower occupies the upper-left corner, with the toilet beside it and a compact vanity opposite. The modeled door opens toward the left wall without intersecting the fixtures. Its swing still passes through floor used to approach the shower.
The 36 in shower label describes the outer block. It does not guarantee a 36 in clear interior after the base rim, lining and enclosure are accounted for. At the vanity, the sink center is 15 in from the right wall, so there is little reason to squeeze another tall obstruction beside it. Choose this arrangement when you prefer the larger shower footprint to additional counter width.
- Toilet-to-vanity gap: 21 in
- Toilet centerline to right wall: 18 in
B: trade shower footprint for a longer counter
Reducing the shower block to 32 in lets the vanity extend farther left without sitting directly opposite its front edge. The counter becomes 36 in wide, while its depth stays 21 in. The toilet and vanity therefore still face each other across the same 21 in gap.
This is a candidate to investigate when storage matters, not an instruction to buy any product labeled “32 inch.” Check the finished shower interior and the opening with its enclosure installed. A narrow frame, inward-projecting hardware or an awkward entrance can undermine the apparent gain. Try the actual shower size in a showroom if possible.
- Vanity front to opposite wall: 51 in
- Toilet centerline to right wall: 15 in
C: turn the shower entrance toward the middle
A neo-angle base cuts off the outside corner, directing its entrance diagonally into the room. Moving the vanity to the left wall leaves 51 in between its front and the opposite wall, although the room door uses part of that floor.
The model calculates about 48 in straight out from the angled face. That is a clearance depth, not the door’s opening width. Nor does the “38 inch” label establish a bigger interior than Layout A: MAAX’s 38⅛ in example lists a 33½ in interior. Use the chosen base and matching enclosure drawings together. The toilet’s 15 in centerline-to-wall spacing also deserves a physical comfort check.
- Toilet-to-vanity gap: 24 in
- Toilet centerline to tub edge: 15 in
D: keep the tub and reduce vanity depth
The shallow vanity leaves a 24 in facing gap: 72 − 30 − 18. Its 18 in depth must include the complete projection you plan around, not just the cabinet box. Add the countertop and handles to the comparison.
The 12 in strip beyond the tub is not automatically ready for shelving. An alcove product needs its specified enclosure and support; draw any added framing into the plan. Kohler’s 60 × 30 in example gives nominal dimensions and requires actual-product rough-in measurements. An outward or pocket door may solve a particular conflict, but neither guarantees that a wider vanity will fit.
Counter width and aisle space are different decisions
Use this distinction when comparing cabinets: width buys counter space; depth consumes the aisle. A narrower but equally deep vanity does not improve the gap directly in front of the toilet. Open its drawers on your taped floor plan and leave room to stand while using them.
Measure the finished shower opening separately
DreamLine’s measuring demonstration starts with the opening between finished walls. Around 0:20–1:10, the presenter measures at the top, middle and bottom, then checks whether the walls are plumb and the threshold is level. Use those measurements to compare the selected enclosure’s adjustment range. This is useful for all three shower plans: a nominal base footprint does not tell you the finished opening or confirm that a particular door will fit.
After selecting the enclosure, test its opening alongside the room door. Include the handle and a person entering, drying off and reaching a towel. Passing the fixture-block checks does not answer those everyday questions.
Final Takeaway
In a 6x6 bathroom, start with the bathing space you need and compare what each arrangement leaves for using it. A favors the larger square shower footprint; B gives more counter width; C changes the entrance angle; D retains a tub with a shallow vanity. Choose using finished dimensions, real product drawings and a door-and-user mock-up before confirming the installation.
Main Sources
- NKBA Bathroom Planning Guidelines — spacing recommendations and model-code references.
- MAAX Neo-Angle Base 38 — separate outer and interior dimensions.
- Kohler Underscore K-1956-RA — nominal tub dimensions and rough-in instructions.
Plans are illustrative BathDraft geometry. They do not certify local code compliance, accessibility or the largest fixtures possible in every 6x6 room.