An 8x10 bathroom measures 96 × 120 inches, giving you 80 square feet, or about 7.4 m². The four layouts below explore separate bathing areas, a shower-only room and laundry. None is a universal fit: the exact doorway, installed fixture dimensions and opening movements decide which is worth adapting.
Give the room one clear priority
If both a tub and shower matter, compare A and C. If you rarely bathe, B removes a large fixture and simplifies the arrangement. D replaces the separate shower with a laundry stack and reduces the vanity to 48 inches. These are useful choices, not a ranking by how many fixtures a plan can hold.
The 72-inch vanity in the first three plans is a modeling choice, not a requirement. If one sink would suit your household, a shorter cabinet may free a better doorway or storage position.
Start with finished wall-to-wall measurements. Add the doorway, windows and existing plumbing to the bathroom layout planner. If the room is open to the studs, allow for the proposed wall finishes. The examples use a 21-inch-deep vanity, a toilet projecting 30 inches and a 30-inch entry-door leaf; your products may differ.
Four arrangements, with the important gaps explained
The dashed zones show selected reference spaces, not complete installation checks. The NKBA guide distinguishes recommendations from model-code minimums; local requirements still need checking. Swipe the diagrams sideways on a narrow screen, or focus them and use the arrow keys.
A. Keep both bathing options, but resolve the shared wall
The shower is turned lengthwise, taking a 36 × 60-inch footprint beside the tub. The 72-inch double vanity occupies the opposite side wall, while the toilet sits near the entrance.
The far-wall arithmetic is exact: 60 + 36 = 96 inches. It leaves no spare width for a separating assembly or installation tolerance. A real shower base also has a defined threshold orientation; rotating its rectangle does not prove the entrance can go on the short end shown.
The selected shower-front strip reaches 33 inches before the toilet block. The toilet center is 18 inches from the entrance wall, and 42 inches from the shower’s end. Those are different measurements. Treat A as an arrangement to investigate with product drawings; our tub and separate shower guide offers other orientations.
B. Leave out the tub and work on the shower entrance
The shower occupies the far-left corner. The toilet sits below it on the left wall, facing the vanity across 96 − 30 − 21 = 45 inches of floor. This is the first plan to compare when a separate bath would see little use.
The planner also reports 84 inches in front of the shower, but that figure applies to a selected narrow strip beside the toilet. It is not 84 inches of clear floor across the whole shower frontage. Choose the enclosure and entrance position before relying on that number; the diagram below shows why.
C. Split the tub and shower between opposite ends
A neo-angle shower takes the far-left corner; the tub moves to the entrance wall. The vanity faces the toilet across a 45-inch gap, narrowing to 33 inches beside the shower’s outer bounding box.
The entrance-wall budget is close: a 3-inch margin, 30-inch door leaf, another 3-inch gap and the 60-inch tub fill the 96-inch width. The drawing does not include the door’s rough opening, trim or the tub’s supporting enclosure.
Check the shower interior too. The Kohler Memoirs 42-inch neo-angle base is one example of a nominal outside size, with its own installation requirements. A clipped corner, wall lining and glass change what is usable inside; “42-inch shower” does not settle the entry width.
D. Put laundry near the bathroom routine
The tub occupies 60 inches of the far wall, leaving 36 inches beside it. Below the tub, a generic 29 × 37-inch laundry envelope faces the 48-inch vanity. Their gap is 96 − 37 − 21 = 38 inches, before an appliance door opens.
Choose the machines before treating that rectangle as sufficient. For comparison, LG’s WM4000H specification lists a 30¼-inch body depth and a 55-inch depth with its door open, plus separate installation clearances. Verify the complete stack, overhead space, approved stacking kit, connections and ventilation. Our bathroom laundry layouts explain this shared-space decision in more detail.
Read each measurement in its direction
Layout B illustrates a common floor-plan trap. The shower ends 36 inches from the far wall, so the distance onward to the entrance wall is 84 inches. However, the toilet occupies part of that frontage. The planner can place its 24-inch-wide test strip beside the toilet; it has not selected or approved an actual shower door.
Mark the actual enclosure opening, hinge or sliding-panel travel, then try entering and drying off. Repeat that check with the bathroom door open. A long distance measured through one strip cannot answer every movement question.
Check the third dimension before choosing fixtures
In Fifi McGee’s bathroom-layout video, the section from 4:13 to 5:12 explains why a plan can look workable from above yet fail beneath a low or sloping ceiling. Apply that check to the bathing locations here: measure headroom from the proposed finished standing surface, including a shower tray or tub basin, and allow for any drainage build-up. Moving a fixture on paper does not establish its usable height.
Would another two feet change the choice?
An 8x8 room has 64 square feet; an 8x10 has 80; an 8x12 has 96. Extra length can improve a particular approach or cabinet run, but it does not widen an 8-foot wall. Likewise, calling this room “10x8” does not let you move the doorway without rechecking the arrangement. Compare the actual openings, not just the floor area.
Final Takeaway
Keep the feature that earns its space. Investigate A or C for a tub and separate shower, B for shower-only use, or D for laundry. Then verify the installation openings, moving doors and finished headroom. The preferred 8x10 layout is the one that works during everyday use, not simply with every fixture closed.
Main Sources
- NKBA Bathroom Planning Guidelines — recommendations and model-code references.
- Kohler Memoirs K-9542 specification — nominal corner-base dimensions and rough-in requirements.
- LG WM4000H specification — machine, door-open and installation dimensions.
Plans and explanatory diagrams are original BathDraft studies. Fixture blocks do not replace product instructions, field measurements or locally adopted requirements.